User manual

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
IGMP Snooping Group
This window allows the Switch’s IGMP Snooping Group Table to be viewed. IGMP Snooping allows the Switch to read the
Multicast Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch. The number of
IGMP reports that were snooped is displayed in the Reports field.
To view the IGMP Snooping Group Table, click Monitoring > IGMP Snooping Group:
Figure 11- 25. IGMP Snooping Group Table
The user may search the IGMP Snooping Group Table by VLAN name by entering it in the top left hand corner and clicking
Search.
The following field can be viewed:
Parameter Description
VLAN Name
The VLAN Name of the multicast group.
Multicast Group
The IP address of the multicast group.
MAC Address
The MAC address of the multicast group.
Reports
The total number of reports received for this group.
Port Member
The ports that are members of the group.
NOTE: To configure IGMP snooping for the xStack DGS-3400 Series switch, go to the L2
Features folder and select IGMP Snooping. Configuration and other information
concerning IGMP snooping may be found in Section 7 of this manual under IGMP
Snooping.
273