User manual

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
JWAC User Account
To view JWAC user settings for the Switch, click Security > JWAC > JWAC User Account, which will open the following
window:
Figure 10- 51. JWAC User Account window
To configure JWAC user settings, click the Add button, which will open the following window:
Figure 10- 52. JWAC User Account Add Table window
To set the User Account settings for the JWAC by the Switch, complete the following fields and then click the Add button. To
clear the current JWAC user settings in the table at the bottom of the window, click the Delete All button.
Parameter Description
User Name
Enter a username of up to 15 alphanumeric characters.
New Password
Enter the password of the user. This field is case-sensitive and must be a complete
alphanumeric string.
Confirm New
Password
Retype the password entered in the previous field.
Click Apply to implement changes made.
To view JWAC user settings for the Switch, click on the Hyperlinked Show All JWAC User Account Entries
, which will open the
following window:
Figure 10- 53. JWAC User Account Table window
To add another JWAC user account to the Switch, click the Add button, to clear all the existing entries, click the Clear All button.
245