User manual

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
JWAC (Japanese Web-based Access Control)
The JWAC folder contains four windows: JWAC Global Configuration, JWAC Port Settings, JWAC User Account and
JWAC Host Information.
JWAC Global Configuration
Use this window to enable and configure Japanese Web-based Access Control on the Switch. Please note that JWAC and Web
Authentication are mutually exclusive functions. That is, they cannot be enabled at the same time. To use the JWAC feature,
computer users need to pass through two stages of authentication. The first stage is to do the authentication with the quarantine
server and the second stage is the authentication with the Switch. For the second stage, the authentication is similar to Web
Authentication, except that there is no port VLAN membership change by JWAC after a host passes authentication. The RADIUS
server will share the server configuration defined by the 802.1X command set.
To configure JWAC global settings for the Switch, click Security > JWAC > JWAC Global Configuration, which will open the
following window:
Figure 10- 46. JWAC Global Settings window
240