User manual

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Select IPv6 to instruct the Switch to examine the IPv6 address in each frame's header.
VLAN
Selecting this option instructs the Switch to examine the VLAN identifier of each packet header
and use this as the full or partial criterion for forwarding.
Source MAC
Source MAC Mask - Enter a MAC address mask for the source MAC address.
Destination MAC
Destination MAC Mask - Enter a MAC address mask for the destination MAC address.
802.1p
Selecting this option instructs the Switch to examine the 802.1p priority value of each packet
header and use this as the, or part of the criterion for forwarding.
Ethernet type
Selecting this option instructs the Switch to examine the Ethernet type value in each frame's
header.
To view the settings for a created profile, click its corresponding button in the Access Profile table, revealing the following
window.
Figure 9- 4. Access Profile Entry Display for Ethernet
The page shown below is the IP Access Profile Configuration page.
177