User manual

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Forwarding & Filtering
Unicast Forwarding
To view this window click, Layer 2 Features >
Forwarding & Filtering > Unicast For-
warding.
Figure 7- 48. Setup Static Unicast Forwarding Table window
To add or edit an entry, define the following parameters and then click Add/Modify:
Parameter Description
VLAN ID (VID)
The VLAN ID number of the VLAN on which the above Unicast MAC address resides.
MAC Address
The MAC address to which packets will be statically forwarded. This must be a unicast MAC
address.
Unit
Select the switch in the switch stack to be modified.
Port
Allows the selection of the port number on which the MAC address entered above resides.
Click Add to implement the changes made. To delete an entry in the Static Unicast Forwarding Table, click the corresponding
under the Delete heading.
Multicast Forwarding
The following figure and table describe how to set up Multicast Forwarding on the Switch. To view this window, click, L2
Features > Forwarding & Filtering >Multicast Forwarding:
Figure 7- 49. Static Multicast Forwarding Settings window
The Static Multicast Forwarding Settings window displays all of the entries made into the Switch's static multicast forwarding
table. Click the Add button to open the Setup Static Multicast Forwarding Table window, as shown below:
162