User manual

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 7- 6. Static VLAN window - Modify
The following fields can then be set in ws: either the Add or Modify 802.1Q Static VLANs windo
Parameter Description
Unit
Select the switch in the switch stack for which to configure VLANs.
VID (VLAN ID)
AN ID of an existing VLAN in Allows the entry of a VLAN ID in the Add window, or displays the VL
the Modify window. VLANs can be identified by either the VID or the VLAN name.
VLAN Name
LAN name in Allows the entry of a name for the new VLAN in the Add window, or for editing the V
the Modify window.
Advertisement
will allow the Switch to send out GVRP packets to outside sources, Enabling this function
notifying that they may join the existing VLAN.
Type
is VLAN. Displays the type of protocol associated with th
Protocol ID
col-based VLANs. The Switch supports
normal 802.1Q VLAN on the Switch.
n the
parameter will instruct the Switch to forward packets to this VLAN if the tag in
itch to forward packets to this VLAN if the tag
The following parameters allow for the creation of proto
14 pre-configured protocol-based VLANs plus one user-defined protocol based VLAN and one
user defined packet ID setting where the administrator may configure the settings for the
appropriate protocol or ID for forwarding packets (16 total). Selecting a specific protocol will
indicate which protocol will be utilized in determining the VLAN ownership of a tagged packet.
Pre-set protocol-based VLANs on the Switch include:
Port – Using this parameter will allow the creation of a
IP – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag i
packet header is concurrent with this protocol. This packet header information is based on the
Ethernet protocol.
RARP - Using this
the packet header is concurrent with this protocol. This packet header information is defined by
the Reverse Address Resolution (RARP) Protocol.
IPX 802.3 - Using this parameter will instruct the Sw
in the packet header is concurrent with this protocol. This packet header information is defined by
121