D-Link AirPlus XTREME G WUA-2340 802.11g (2.4GHz) Wireless G USB 2.
Package Contents Contents of Package: D-Link AirPlus Xtreme GTM WUA-2340 2.4 GHz Wireless G USB 2.0 Adapter Manual on CD-ROM Quick Installation Guide Cradle If any of the above items are missing, please contact your reseller. System Requirements: A computer or laptop with an available USB 2.
Introduction TM The D-Link AirPlus Xtreme G WUA-2340 Wireless G USB Adapter is an 802.11b/802.11g high-performance,convenient Plug & Play USB 2.0 solution that brings wireless networking to your laptop or desktop PC. With a maximum wireless signal rate of up to 54Mbps (108Mbps* in Turbo mode) you can connect to a wireless network at home, at the office or at any wireless hotspot. Now you can stay connected wherever you are and wherever you go.
Introduction (continued) 802.1x: Authentication which is a first line of defense against intrusion. In the authentication process, the Authentication Server verifies the identity of the client attempting to connect to the network. Unfamiliar clients would be denied access. For home users that will not incorporate a RADIUS server in their network, the security for the WUA-2340, used in conjunction with other WPA-compatible 802.11 products, will still be much stronger than ever before.
Features and Benefits Provides maximum wireless signal rate of up to 54Mbps (108Mbps1 in Turbo mode). Compact size for placement anywhere. Convenience of Plug & Play installation. Fully 802.11b/802.11g compatible. Powered by the USB port; no external power source is required. USB 2.0 standard2. Better Security with 802.1x and WPA - In addition to 64-,128-bit WEP encryption, you can also securely connect to a wireless network using 802.
Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. D-Link wireless products will allow you access to the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking brings. A wireless local area network (WLAN) is a computer network that transmits and receives data with radio signals instead of wires.
Wireless Basics (continued) Installation Considerations The WUA-2340 lets you access your network using a wireless connection from virtually anywhere within its operating range. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
Getting Started With its default settings, the WUA-2340 will connect with other D-Link AirPlus Xtreme GTM products, right out of the box. There are basically two modes of networking: Infrastructure – using an access point or router, such as the DI-624. Ad-Hoc – directly connecting to another computer, for Peer-to-Peer communication, using wireless network adapters on each computer, such as two or more WUA-2340 Wireless Network USB adapters.
Getting Started (continued) Setting up a Wireless Infrastructure Network 1 2 3 WUA-2340 WUA-2340 4 5 For a typical wireless setup at home (as shown above), please do the following: You will need broadband Internet access (a cable or DSL-subscriber line into your home or office). Consult with your cable or DSL provider for proper installation of the modem. Connect the cable or DSL modem to your broadband router. (See the Quick Installation Guide included with your router.
Getting Started (continued) Setting up a Wireless Ad-Hoc Network WUA-2340 Wireless G USB 2.0 Adapter Install the D-Link AirPlus Xtreme GTM WUA-2340 Wireless USB 2.0 adapter into the desktop computer. (See the Quick Installation Guide included with the product.) Install the D-Link AirPlus Xtreme GTM WUA-2340 Wireless USB 2.0 adapter into the laptop computer. (See the Quick Installation Guide included with the product.
Using the Configuration Utility D-Link AirPlus Xtreme GTM WUA-2340 uses the Configuration Utility as the management software. The utility provides the user an easy interface to change any settings related to the wireless adapter. After you have completed the installation of the WUA-2340 (refer to the Quick Installation Guide that came with your purchase) whenever you start the computer, the Configuration Utility starts automatically and the system tray icon is loaded in the toolbar (see illustration below.
Using the Configuration Utility (continued) Link Info Status: Displays the MAC address of the access point or router to which the WUA-2340 is associated. SSID: The Service Set Identifier is the name assigned to the wireless network. The factory SSID setting is default. Frequency: 802.11b indicates that the WUA-2340 is communicating in the 2.4GHz band. Wireless Mode: Either Infrastructure or Ad-Hoc will be displayed here.
Using the Configuration Utility (continued) Encryption: You can see if WEP (Wired Equivalent Privacy) is Enabled or Disabled here. Connection Info: When the WUA-2340 is connected to a wireless network, Connected will be displayed in this field. Tx Rate: The default setting is Auto; Tx Rate settings are automatically determined for a maximum wireless signal rate of up to 54Mbps (108Mbps* in Turbo mode). Channel: The default setting is Auto. The channel selection is automatically determined by the WUA-2340 .
Using the Configuration Utility (continued) Configuration SSID: Service Set Identifier is a name that identifies a wireless network. Access points and wireless devices attempting to connect to a specific WLAN (Wireless Local Area Network) must use the same SSID. The default setting is default. Wireless Mode: Click on the pull-down menu; select from the following options: Infrastructure - connecting to the WLAN using an access point. (This is the default setting).
Using the Configuration Utility (continued) IP Settings Authentication: Choose one of the following modes: Open Authentication – the WUA-2340 is visible to all devices on the network. Shared Authentication – allows communication only with other devices with identical WEP settings. WPA – Wi-Fi protected access improves upon WEP security. In conjunction with a RADIUS server and EAP (extensible authentication protocol), WPA ensures that only authenticated users access the network.
Using the Configuration Utility (continued) IP Settings Using a Proxy Server Check Apply with a profile proxy to use a proxy server in your network. A proxy server increases the speed of web page retrieval and can also act as a filter to limit access to specific Web sites. Automatically detect settings: When this option is selected, the proxy server will automatically adjust to the settings of the network.
Using the Configuration Utility (continued) Proxy Settings (continued) Use the same proxy server for all protocols: To use the same proxy server for all protocols, select this option and enter the IP address for the proxy server in the HTTP field. Other fields will be unavailable. Enter the port number for the proxy server.
Using the Configuration Utility (continued) Advanced Frequency: Select 802.11b/g for compatibility with both 802.11b or 802.11g networks, or select 802.11b only. Super G: Selecting Super G mode enables a maximum wireless signal rate of up to 108Mbps.* XR Mode: Enable or Disable range extension mode. Enabling this feature allows you to increase the range of your communication without adding additional hardware. Starting Ad Hoc Network: When using Ad Hoc mode, select the frequency here.
Using the Configuration Utility (continued) Advanced (continued) Fragmentation Threshold: This value should remain at its default setting of 2432. If you experience a high packet error rate, you may slightly increase your Fragmentation Threshold within the value range of 256 to 2432. Setting the Fragmentation Threshold too low may result in poor performance. RTS Threshold: This value should remain at its default setting of 2432.
Using the Configuration Utility (continued) Available Network: The top section of the window displays the Available Networks. Scroll up and down the list and highlight the network to which you wish to connect. Click on the Connect button. Profile: In the lower half of the screen, you can manage the profiles that you have created for the wireless network at home, at the office and in public places. Scroll up and down and highlight the profile that you wish to configure.
Using the Configuration Utility (continued) Site Survey > Add In this window you can select the type of network connection. Advanced Click OK to save the changes. If you clicked on Add, you can configure, in this window, all the properties of a profile that you wish to add to the network. Configuration, Add or Properties If you clicked on Configuration or Properties you can configure, in this window, all the properties of a profile that already exists in the network.
Using the Configuration Utility (continued) Authentication > WPA Select the available network to which you want to connect. Click Configure. Select WPA in the Authentication field. Click Authentication Config. After you click Authentication Config, the Advanced Security Settings screen will appear. Please see the following page.
Using the Configuration Utility (continued) Authentication > WPA > Advanced Security Settings Select the EAP type here. Leave the User Certificate field blank. Click Validate Server if your authentication server requires it. Enter the User Name. Click Add and the window on the following page will appear. Click OK to save the changes. EAP Type: Extensible Authentication Protocols (EAP-TLS, LEAP, EAP-TTLS, PEAP) allow devices on the network to request authentication from the RADIUS server in the network.
Using the Configuration Utility (continued) Authentication > WPA > Advanced Security Settings > Add Enter the IP address of the RADIUS server in your network. Click OK to save the changes. After entering the information and clicking OK in the dialog box above,the window on the previous page will appear. Click OK to complete the WPA configuration.
Using the Configuration Utility (continued) Authentication > WPA-PSK Select the available network to which you want to connect. Click Configure. WPA-PSK does not require a RADIUS Server in the network. Select WPA-PSK in the Authentication field. Click Authentication Config.
Using the Configuration Utility (continued) Authentication > WPA-PSK (continued) Advanced Security Settings Enter the WPA Passphrase. All the devices on the network must share this same passphrase in order to communicate on the network. Click OK. The configuration is complete. About The About screen gives you the MAC address, Utility Version and the Driver Version of the WUA-2340.
Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about networking computers using Windows 2000/Me/98SE. Go to Start>Control Panel>Network Connections. Select Set up a home or small office network. When this screen appears, click Next.
Networking Basics (continued) Please follow all the instructions in this window: Click Next. In the following window, select the best description of your computer. If your computer connects to the Internet through a router, select the second option as shown. Click Next.
Networking Basics (continued) Enter a Computer description and a Computer name (optional.) Click Next. Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next.
Networking Basics (continued) Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer. This may take a few minutes.
Networking Basics (continued) In the window below, select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next. Insert a disk into the Floppy Disk Drive, in this case drive A.
Networking Basics (continued) Please read the information under Here’s how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. To continue click Next.
Networking Basics (continued) Please read the information on this screen, then click Finish to complete the Network Setup Wizard. The new settings will take effect when you restart the computer. Click Yes to restart the computer. You have completed configuring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your new wireless network will be ready to use.
Networking Basics (continued) Naming Your Computer To name your computer in Windows XP, please follow these directions: Click Start (in the lower left corner of the screen). Right-click on My Computer. Select Properties. Select the Computer Name Tab in the System Properties window. You may enter a Computer Description if you wish; this field is optional. To rename the computer and join a domain, click Change.
Networking Basics (continued) Naming Your Computer In this window, enter the Computer name. Select Workgroup and enter the name of the Workgroup. All computers on your network must have the same Workgroup name. Click OK. Checking the IP Address in Windows XP All wireless adapter-equipped computers in your network must be in the same IP address range (see Getting Started in this manual for a definition of IP address range.
Networking Basics (continued) Checking the IP Address in Windows XP This window will appear. Click the Support tab. Click Close. Assigning a Static IP Address in Windows XP/2000 Note: Many broadband routers will automatically assign IP addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable router you will not need to assign static IP addresses.
Networking Basics (continued) Assigning a Static IP Address in Windows XP/2000 Double-click on Network Connections. Right-click on Local Area Connections. Click on Properties.
Networking Basics (continued) Assigning a Static IP Address in Windows XP/2000 Click on Internet Protocol (TCP/IP). Click Properties. Input your IP address and subnet mask. (The IP addresses on your network must be within the same range. For example, if one computer has an IP address of 192.168.0.2, the other computers should have IP addresses that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must be the same for all the computers on the network.
Networking Basics (continued) Checking the Wireless Connection by Pinging in Windows XP and 2000 Go to Start > Run > type cmd. A window similar to this one will appear. Type ping xxx.xxx.xxx.xxx, where xxx is the IP address of the wireless router or access point. A good wireless connection will show four replies from the wireless router or access point, as shown.
Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the WUA-2340. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows XP. If you have another operating system, these solutions will still apply although the appearance on your computer screen may differ.) 1. How do I check to see that the drivers for the WUA-2340 are installed properly? Go to Start > My Computer > Properties.
Troubleshooting (continued) Double-click on Network Adapters. Right-click on D-Link AirPlus G WUA-2340 Wireless USB Adapter. D-Link AirPlus Xtreme G DWL-G132 Wireless USB Adapter Select Properties to check that the drivers are installed properly. D-Link AirPlus Xtreme G DWL-G132 Wireless USB Adapter D-Link AirPlus Xtreme G DWL-G132 Wireless USB Adapter Look under Device Status to check that the device is working properly. Click OK.
Troubleshooting (continued) 2. What variables may cause my wireless products to lose reception? D-Link products let you access your network from virtually anywhere you want. However, the positioning of the products within your environment will affect the wireless range. Please refer to Installation Considerations in the Wireless Basics section of this manual for further information about the most advantageous placement of your D-Link wireless products. 3.
Technical Specifications Standard USB 2.01 IEEE 802.11g IEEE 802.11b Bus Type USB 2.0 Temperature Operating: 0ºC to 40ºC (32ºF to 104ºF) Storing: -20ºC to 75ºC (4ºF to 167ºF) Humidity: 80% maximum, non-condensing Antenna Type: Omni-directional Modulation Technology: Orthogonal Frequency Division Multiplexing (OFDM) Complimentary Code Keying (CCK) Security: 64-, 128-bit WEP WPA - Wi-Fi Protected Access Data Rates: 54, 48, 36,24, 18, 11, 9, 6 5.
Technical Specifications (continued) Receiver Sensitivity: 54Mbps OFDM 48Mbps OFDM 36Mbps OFDM 24Mbps OFDM 18Mbps OFDM 12Mbps OFDM 11Mbps OFDM 9Mbps OFDM 6Mbps OFDM 5.5Mbps CCK 2Mbps QPSK 1Mbps BPSK Transmitter Output Power: 14Bm ± 2dB Physical Dimensions: L = 3.3 inches W = 2.1 inches H = 0.2 inches Weight: 0.021 lb. (4.
Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link Technical Support through our website, or by phone. Tech Support for customers within the United States: D-Link Technical Support over the Telephone: (877) 453-5465 24 hours a day, seven days a week.
Warranty and Registration (USA only) Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from: • • D-Link or its authorized reseller or distributor and Products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, addresses with an APO or FPO.
• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same. • The original product owner must obtain a Return Material Authorization (“RMA”) number from the Authorized D-Link Service Office and, if requested, provide written proof of purchase of the product (such as a copy of the dated purchase invoice for the product) before the warranty service is provided.
LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY. Governing Law: This Limited Warranty shall be governed by the laws of the State of California.
