4G LTE ROUTER DWR-M921 QUICK INSTALLATION GUIDE
ENGLISH CONTENTS OF PACKAGING CONTENTS 4G LTE ROUTER DWR-M921 12V 1A POWER ADAPTER ETHERNET CABLE (CAT5 UTP) CONNECT THE ROUTER TO YOUR PC DURING SETUP If any of these items are missing from your packaging contact your reseller 2 DWR-M921
ENGLISH PRODUCT SETUP HARDWARE SETUP Ensure that your DWR-M921 Mobile Router is powered off before performing the steps below. 1. Flip the router around and open the lid at the bottom of the router. 2. Gently press down and slide the silver SIM card holder to the right (OPEN ) & open the flap. 3. Insert a standard USIM card into the SIM card holder with the gold contacts facing downward. 4. Close the flap and slide the SIM card holder back to the left ( LOCK) to lock it. Close the lid. 5.
ENGLISH TROUBLESHOOTING SETUP AND CONFIGURATION PROBLEMS 1. HOW DO I CONFIGURE MY DWR-M921 ROUTER OR CHECK MY WIRELESS NETWORK NAME (SSID) AND WIRELESS PASSWORD (WPA KEY)? - Connect your PC to the router using an Ethernet cable. - Open a web browser and enter the router's IP address: http://192.168.0.1 - Log into the router using the default username admin, the default password is admin. - Once logged in, you can configure your router through the GUI.
Tech Support for customers in ENGLISH TECHNICAL SUPPORT D-Link Middle East - Dubai, U.A.E. Technical Support: +971-4-8809033 General Inquiries: info.me@me.dlink.com Tech Support: support.me@me.dlink.com Egypt Technical Support Call Center: +20 2258 66777 General Inquiries: info.eg@me.dlink.com Tech Support : support.eg@me.dlink.com Kingdom of Saudi Arabia Technical Support: +966 1121 70009 General Inquiries: info.sa@me.dlink.com Tech Support: support.sa@me.dlink.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
