User's Manual

3D-Link DWR-922 User Manual
Section 1 - Product Overview
Hardware Overview
Front View
1 Reset Button Press this button with an unfolded paperclip and hold for ten seconds to reset the device.
2 LAN LED Will be lit if an Ethernet connection is established, and will blink when data is being transferred.
3 Power LED Will be lit if the device is powered on and working.
4 WPS Button Press this button to initiate a new WPS connection. See WPS Button on page 61 for details.
5 Signal Strength LED Will blink red if there is no SIM card or no signal. Solid red, amber, or green indicates the signal strength.
6 2G/3G LED Will be lit if a 2G or 3G connection is established, and will blink when data is being transferred.
7 4G LED Will be lit if a 4G LTE connection is established, and will blink when data is being transferred.
8 WLAN LED Will be lit if the wireless function is enabled, and will blink when wireless data is being transferred.
1 4
5 6 87
2 3