User's Manual

31D-Link DWR-922 User Manual
Section 4 - Conguration
PPPoE
Enter your PPPoE user name.
Enter your PPPoE password.
Enter the ISP Service Name (optional).
Maximum Transmission Unit - you may need to change the MTU
for optimal performance with your specic ISP.
Select either Obtain DNS Server address Automatically or Use
the following DNS address.
Enter the primary and secondary DNS server addresses.
Check to enable the DHCP-PD feature.
If you did not enable DHCP-PD, enter the LAN (local) IPv6 address.
Displays the router’s LAN link-local address.
Check to enable the autoconguration feature.
Select Stateful (DHCPv6) or SLAAC + Stateless DHCPv6. This will
determine the conguration type for you IPv6 LAN.
If you selected Stateful (DHCPv6), enter the address range start.
If you selected Stateful (DHCPv6), enter the address range end.
Username:
Password:
Service Name:
MTU:
DNS Setting:
DNS Addresses:
Enable DHCP-PD:
LAN IPv6 Address:
LAN IPv6 Link-
Local Address:
Enable
Autoconguration:
Autoconguration
Type:
IPv6 Address
Range (Start):
IPv6 Address
Range (End):