User's Manual

29D-Link DWR-922 User Manual

Section 4 - Conguration

Static IPv6

Enter the static IPv6 address of the router.

Enter the subnet prex length.

Enter the default gateway address.

Enter the primary and secondary DNS server addresses.

Enter the LAN (local) IPv6 address for the router.

Displays the router’s LAN link-local address.

Check to enable the autoconguration feature for LAN devices.

Select Stateful (DHCPv6) or SLAAC + Stateless DHCPv6. This will

determine the conguration type for you IPv6 LAN.

If you selected Stateful (DHCPv6), enter the address range start.

If you selected Stateful (DHCPv6), enter the address range end.

Enter the IPv6 address lifetime (in seconds).

Click Apply to save your settings, or Refresh to revert to your

previous settings.

IPv6 Address:

Subnet Prex

Length:

Default Gateway:

DNS Addresses:

LAN IPv6 Address:

LAN IPv6 Link-

Local Address:

Enable

Autoconguration:

Autoconguration

Type:

IPv6 Address

Range (Start):

IPv6 Address

Range (End):

Router

Lifetime: