User's Manual
26D-Link DWR-922 User Manual
Section 4 - Conguration
Dynamic IP Failover
If your ISP requires you to enter a host name, enter it here. In most
cases, you may leave this blank.
Enter the primary DNS server.
Enter the secondary DNS server.
You may need to change the Maximum Transmission Unit (MTU)
for optimal performance. The default value is 0.
The default MAC address is set to the WAN port’s physical interface
MAC address. Changing it is not recommended unless required
to do so by your ISP. You can use the Clone button to replace the
WAN port’s MAC address with the MAC address of your PC.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
Host Name:
Primary DNS
Server:
Secondary DNS
Server:
MTU:
MAC Address: