User's Manual
25D-Link DWR-922 User Manual
Section 4 - Conguration
Static IP Address Failover
Enter the IP address assigned to your network connection.
Enter the subnet mark.
Enter the default gateway.
Enter the primary DNS server.
Enter the secondary DNS server.
You may need to change the Maximum Transmission Unit (MTU)
for optimal performance. The default value is 0.
The default MAC address is set to the WAN port’s physical interface
MAC address. Changing it is not recommended unless required
to do so by your ISP. You can use the Clone button to replace the
WAN port’s MAC address with the MAC address of your PC.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS
Server:
Secondary DNS
Server:
MTU:
MAC Address: