User's Manual
24D-Link DWR-922 User Manual
Section 4 - Conguration
Multi-WAN Conguration
Fill in only if requested by your ISP (optional).
Fill in only if requested by you ISP (optional).
Retype password if required above.
If your ISP provides you with a dial-in number, enter it here. Empty
by default.
Select PAP, CHAP or Auto if requested by your carrier. The default
authentication method is Auto.
Enter the APN (Access Point Name) for your 3G/4G connection.
Press Reset to restore your APN setting to factory default. This
button leaves all other settings unchanged, including those on
this page.
If your SIM/UICC card has a PIN, enter it here (optional).
Turns the cellular radio on or o. This setting is intended to disable
the cellular radio for areas where radio transmissions may be
restricted.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
Username:
Password:
Verify Password:
Dialed Number:
Authentication:
APN:
Reset:
Pin Code:
Radio
Frequency:
After selecting a secondary WAN and clicking apply, you will be directed to a setup screen for the relevant connection type.
4G LTE / 3G failover