User's Manual
57D-Link DWR-922 User Manual
Section 4 - Conguration
Displays your current rmware’s version.
Displays your current rmware’s release date.
After you have downloaded a new rmware, click Browse to
locate the rmware on your computer, then click Upload to start
the rmware upgrade.
Warning: You must use a wired connection to upload the rmware
le; do not use a wireless connection. During the upgrade
process, do not power o your computer or router, and
do not refresh the browser window until the upgrade is
complete.
If the rmware you want to install is not an ocial D-Link release,
you will need to check this box.
Warning: Unocial rmware is not supported, and may cause
damage to your device. Use of unocial rmware is at
your own risk.
Here, you can upgrade the rmware of your router. Make sure the rmware you want to use is on the local hard drive of the
computer and then click Browse to upload the le. You can check for and download rmware updates at the D-Link support site at
http://support.dlink.com.
Current Firmware
Version:
Current Firmware
Date:
Select Firmware:
Accept Unocial
Firmware:
Firmware Upgrade