User's Manual
28D-Link DWR-920V User Manual
Section 5 - Troubleshooting
Troubleshooting
This chapter provides solutions to problems that can occur during the setup and configuration of the DWR-920V
U.S. Cellular Home Phone. Read the following descriptions if you are having problems.
What kind of phone do I need to use with the DWR-920V U.S. Cellular Home Phone?
Most standard touch-tone phones may be used. Rotary phones are not supported. Cordless phone systems provide the most
exibility and allow you to easily place additional handsets throughout your home. Cordless phone systems still need to be
plugged into a power outlet. During a power outage, a standard corded phone which does not require electrical power is
recommended.
How do I reset my DWR-920V U.S. Cellular Home Phone to factory default settings?
If you cannot remember your administrator password, unfold a paperclip and use it to press and hold the recessed reset
button on the bottom of the device for about 10 seconds. Resetting the device to factory default settings will erase the current
conguration.
Will my DWR-920V U.S. Cellular Home Phone work in areas with no or low wireless signal strength?
A strong wireless signal (full signal bars) is recommended for optimal performance. A moderate signal (two signal bars) may
be sucient. It is recommended that you nd a location with a strong wireless signal (full signal bars) for your device.
Does 911 work on this device?
Yes, the U.S. Cellular Home Phone is Enhanced 911 (E911) compatible. As the device is intended for indoor use, please be
prepared to provide your location inside the premises to public service personnel when you dial 911.