User's Manual

10D-Link DWR-116 User Manual
Section 3 - Conguration
If the router detected or you selected PPPoE, enter your
PPPoE username and password and click Next to continue.
Note: Make sure to remove your PPPoE software from your
computer. The software is no longer needed and will not work
through a router.
If the router detected or you selected DHCP, you may enter
a MAC address and host name, click Next to continue. You
may also need to click the Clone button in order to copy
the MAC address from your computer. If you are unsure,
check with your ISP to nd out what their requirements are.