Quick Installation Guide 802.11ac Dual-Band Unified Access Point This document will guide you through the basic installation process for your new D-Link Unified Wireless Access Point.
About This Guide This installation guide provides basic instructions for installing the DWL-6720AP Wireless Access Point on your network. For additional information about how to use the Access Point, please see the User Manual, which is available on the D-Link support website.
Installation DWL-6720AP POWER IN Connect the Power Cord to the PoE Adapter and a power outlet with earthing connection LAN(POE) on DWL-6720AP to Ethernet Port labeled PoE on PoE Adapter PoE LAN Connect Computer to Ethernet Port labeled LAN on PoE Adapter Computer Configure the access point To set up and manage the DWL-6720AP, use one of the following methods: • • • Manage the access point from the computer via the Unified Wireless Switch or Wireless Controller: Connect the access point to a Unified
2. P lug the one end of Cat 5 cable into the LAN port on DWL-6720AP, and the other end to the port labeled POE on the PoE Adapter. LAN (POE) 5. Attach a grounding wire. L:200mm*1pcs (18 AWG) CONSOLE EXT ANT RESET INT ANT M3.5* 5mm*1pcs 6. Attach access point to a pole 3. C hoose a gasket (6 mm or 4 mm) to fit the Ethernet cable; if CONSOLE is not in-use, please put on the black gasket. LAN (POE) CONSOLE EXT ANT RESET INT ANT 4. C lose the bottom panel with a Phillips screwdriver.
7. Fasten the mounting ties. Wall Mounting Installation Installation 1. U se the supplied screws to attach the Wall Mount Base to the wall. STP4 x 25.4mm 2. A ttach DWL-6720AP to the Wall Mount Base. Thread and fasten the Mounting Ties. Instructions for the installation of that conductor to building earth by a SKILLED PERSON.
FRANÇAIS À propos de ce guide Ce guide d'installation fournit les instructions de base pour l'installation du point d'accès sans fil DWL-6720AP sur votre réseau. Pour de plus amples informations sur l'utilisation du point d'accès, consultez le manuel d'utilisation, disponibles sur le site Web d'assistance de D-Link.
Installation DWL-6720AP ENTRÉE D'ALIMENTATION PoE LAN Connectez l'ordinateur au port Ethernet étiqueté PoE sur l'adaptateur PoE Ordinateur Figure 4.
FRANÇAIS 2. B ranchez une extrémité du câble Cat 5 dans le port LAN du DWL-6720AP et l'autre extrémité dans le port étiqueté POE de l'adaptateur PoE. LAN (POE) 5. Connectez un câble de mise à la terre. L:200 mm 1pc (18 AWG) CONSOLE EXT ANT RESET INT ANT M3.5* 5 mm 1pc 6. Fixez le point d'accès à un poteau 3. C hoisissez un joint (6 mm ou 4 mm) pour s'adapter au câble Ethernet; si la CONSOLE n'est pas utilisée, mettez le joint noir. LAN (POE) CONSOLE EXT ANT RESET INT ANT 4.
7. Fixez les attaches de montage. Installation du support mural Installation 1. U tilisez les vis fournies pour fixer la base de montage mural au mur. FRANÇAIS STP 4 x 25,4 mm 2. F ixez le DWL-6720AP à la base de montage mural. Enfilez et fixez les attaches de montage. Instructions pour l'installation de ce conducteur à la terre du bâtiment par une PERSONNE QUALIFIÉE.
Appendix A - Statements Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
U se only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC/IC limit and is prohibited. 4. Installation procedure Please refer to user’s manual for the detail. 5.
DETACHABLE ANTENNA USAGE This radio transmitter (IC: 4216A-WL6720APA1 / Model: DWL-6720APA1) has been approved by ISED to operate with the antenna type listed below with maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
1. Installation C e produit est destine a un usage specifique et doit etre installe par un personnel qualifie maitrisant les radiofrequences et les regles s’y rapportant. L’installation et les reglages ne doivent pas etre modifies par l’utilisateur final. 2.
3. Please contact the authorized distributor of D-Link for related accessories (outdoor interconnection cable, cable gland, cable, etc.) for purchase and installation. 1. Un système de mise à la terre est nécessaire pour protéger votre installation extérieure de la foudre et de l'accumulation d'électricité statique. Lorsque vous installez le point d'accès extérieur sur un poteau ou un mur, vous devez le raccorder au même système de mise à la terre* que la prise électrique.
NOTES D-Link DWL-6720AP Quick Install Guide 15
Ver. 2.
