User Manual

10D-Link DWL-3150 User Manual

Section 3 - Conﬁguration

To conﬁgure the DWL-3150, use a computer which is connected to the DWL-3150 with an Ethernet cable (see the

Network Layout diagram).

First, disable the Access the Internet using a proxy server function. To disable this function, go to Control Panel >

Internet Options > Connections > LAN Settings and uncheck the enable box.

Start your web browser program (Internet Explorer, Netscape Navigator).

Type the IP address and http port of the DWL-3150 in the address field

(http://192.168.0.30) and press Enter. Make sure that the IP addresses of the

DWL-3150 and your computer are in the same subnet.

After the connection is established, you will see the user identiﬁcation window as shown.

Note: If you have changed the default IP address assigned to the DWL-3150, make sure to enter the correct IP

address.

• Type admin in the User Name ﬁeld

• Leave the Password ﬁeld blank

• Click OK

Note: If you have changed the password, make sure to enter the correct password.

Using the Conﬁguration Menu