Wireless N300 Router Manual

28D-Link DIR-615 User Manual

Section 3 - Conﬁguration

Manual Wireless Network Setup

Check the box to enable the wireless function. If you do

not want to use wireless, uncheck the box to disable all

the wireless functions. Click Add New to create your

own time schedule to enable the wireless function.

Service Set Identiﬁer (SSID) is the name of your

wireless network. Create a name using up to 32

characters. The SSID is case-sensitive.

Select one of the following:

802.11g Only - Select if all of your wireless clients

are 802.11g.

Mixed 802.11g and 802.11b - Select if you are

using both 802.11b and 802.11g wireless clients.

802.11b Only - Select if all of your wireless clients

are 802.11b.

802.11n Only - Select only if all of your wireless

clients are 802.11n.

Mixed 802.11n, 802.11b, and 802.11g - Select

if you are using a mix of 802.11n, 11g, and 11b

wireless clients.

Mixed 802.11n and 802.11g - Select if you are using

a mix of 802.11n and 802.11g wireless clients.

The Auto Channel Scan setting can be selected to

allow the DIR-615 to choose the channel with the least

amount of interference.

Indicates the channel setting for the DIR-615. By default the channel is set to 6. The Channel can be changed to ﬁt the

channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan,

this option will be greyed out.

Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance.

Enable Wireless:

Wireless Network

Name:

802.11 Mode:

Transmission Rate:

Enable Auto

Channel Scan:

Wireless Channel: