User's Manual
Table Of Contents
- Package Contents
- Installation
- Configuration
- Web-based Configuration Utility
- Setup Wizard
- Internet Setup
- Wireless Setup
- Network Settings
- DHCP Server Settings
- Port Forwarding
- QoS Engine
- QoS Engine
- Network Filter
- Firewall & DMZ
- Advanced Wireless
- Advanced Network
- IPv6 Routing
- Device Administration
- Save and Restore
- System Check
- Schedules
- Syslog
- Device Info
- Log
- Statistics
- Internet Sessions
- Wireless
- Help
- Web-based Configuration Utility
- Wireless Security
- Connect to a Wireless Network
- Setting Up Wi-Fi Protection
- (WCN 2.0 in Windows Vista)
- Changing the Computer Name and Joining a Workgroup
- Configuring the IP Address in Vista
- Setting Up a Connection or Network Wirelessly
- Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK)
- Connecting to an Unsecured Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
- Technical Specifications
4D-Link RG-DLINK-WBR2320 User Manual
Section 1 - Product Overview
WLAN
A solid light indicates that the
wireless segment is ready.
This LED blinks during wireless
data transmission.
Power LED
A solid light indicates a proper
connection to the power supply.
Local Network LEDs
A solid light indicates a connection
to an Ethernet-enabled computer on
port 1-3 (Port 4 for IPTV). This LED
blinks during data transmission.
INTERNET LED
INTERNET STATUS LED
A solid light indicates that
the RG-DLINK-WBR2320 is ready.
Hardware Overview
LEDs and USB Port
WAN LED
A solid light indicates connection
on the WAN port. This LED blinks
during data transmission.
WPS LED
A solid light indicates
a successful WPS
connection. A blinking
light indicates the device
is trying to establish a
connection.