User's Manual
Table Of Contents
- Package Contents
- Installation
- Configuration
- Web-based Configuration Utility
- Setup Wizard
- Internet Setup
- Wireless Setup
- Network Settings
- DHCP Server Settings
- Port Forwarding
- QoS Engine
- QoS Engine
- Network Filter
- Firewall & DMZ
- Advanced Wireless
- Advanced Network
- IPv6 Routing
- Device Administration
- Save and Restore
- System Check
- Schedules
- Syslog
- Device Info
- Log
- Statistics
- Internet Sessions
- Wireless
- Help
- Web-based Configuration Utility
- Wireless Security
- Connect to a Wireless Network
- Setting Up Wi-Fi Protection
- (WCN 2.0 in Windows Vista)
- Changing the Computer Name and Joining a Workgroup
- Configuring the IP Address in Vista
- Setting Up a Connection or Network Wirelessly
- Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK)
- Connecting to an Unsecured Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
- Technical Specifications
35D-Link RG-DLINK-WBR2320 User Manual
Section 3 - Conguration
Tick this checkbox to enable or disable xed routes to
dened destinations.
Use the drop-down menu to choose the WAN or WAN
(Physical Port) Interface the IP packet must use to transit
out of the Router.
The IP address of the packets that will take this route.
Species the next hop to be taken if this route is used.
Enable:
Interface:
Destination
IPv6:
Gateway:
IPv6 Routing
This option allows you to dene xed routes to dened destinations.