User's Manual
Table Of Contents
- Package Contents
- Installation
- Configuration
- Web-based Configuration Utility
- Setup Wizard
- Internet Setup
- Wireless Setup
- Network Settings
- DHCP Server Settings
- Port Forwarding
- QoS Engine
- QoS Engine
- Network Filter
- Firewall & DMZ
- Advanced Wireless
- Advanced Network
- IPv6 Routing
- Device Administration
- Save and Restore
- System Check
- Schedules
- Syslog
- Device Info
- Log
- Statistics
- Internet Sessions
- Wireless
- Help
- Web-based Configuration Utility
- Wireless Security
- Connect to a Wireless Network
- Setting Up Wi-Fi Protection
- (WCN 2.0 in Windows Vista)
- Changing the Computer Name and Joining a Workgroup
- Configuring the IP Address in Vista
- Setting Up a Connection or Network Wirelessly
- Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK)
- Connecting to an Unsecured Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
- Technical Specifications
9D-Link RG-DLINK-WBR2320 User Manual
Section 2 - Installation
6. Disconnect the Ethernet cable from the router and reconnect your computer to your network.
7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug
anything into the WAN port of the D-Link router.
8. You may now use the other three LAN ports to connect other Ethernet devices and computers. To congure your
wireless network, open a web browser and enter the IP address you assigned to the router. Refer to the Conguration
and Wireless Security sections for more information on setting up your wireless network.