User manual

DIR-620 Multifunction Wireless Router Supporting GSM, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Configuring via Web-based Interface
System Time
On the System> System time page, you can manually set the date and time of the router or
configure automatic synchronization of the system time.
Figure 72. The System > System time page.
To enable automatic synchronization with an NTP server:
• select the Enable NTP checkbox
• specify the needed NTP server in the Ntp servers field or leave the server specified by
default
• select your time zone
• click the Change button.
To set the system time manually:
• deselect the Enable NTP checkbox (if selected)
• enter the current time and date to the fields Time and Date correspondingly
• select your time zone
• click the Change button.
!
When the router is powered off or rebooted, the system time is reset to the default value.
If you have set automatic synchronization for the system time, the internal clock of the
device will be configured after connecting to the Internet. If you have set the system time
manually, you need to set the time and date again (see above).
Page 93 of 100