User manual

DIR-620 Multifunction Wireless Router Supporting GSM, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Configuring via Web-based Interface
Parameter Description
Link status
The state of connection to the WiMAX network.
Red light: The connection is not established.
Yellow light: The USB modem is connecting to the network.
Green light: The connection is established.
MAC-address The MAC address of the WiMAX USB modem.
RSSI
The signal level at the input of the modem's receiver.
CINR
The relation of the signal level to the noise level. This parameter is used to
measure the quality of the signal.
Base station ID
The identifier of the base station.
Transmit power The signal level at the output of the modem's receiver.
Frequency
The frequency of the signal transmitted by the modem's receiver.
Change
Click the button to change the parameters. You can change the parameters of
this page even when your WiMAX USB modem is not connected to the
router.
Connect
Click the button to connect to the WiMAX network. The button is displayed
when the connection is not established.
Disconnect
Click the button to disconnect from the WiMAX network. The button is
displayed when the connection is established or is being established.
Page 86 of 100