User manual

DIR-620 Multifunction Wireless Router Supporting GSM, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Configuring via Web-based Interface
Figure 65. The USB modem > PIN page. The PIN code check is disabled.
If you want to enable the PIN code check, deselect the Disable PIN check checkbox and enter the
PIN code, used before disabling the check, in the PIN code field. Then click the Apply button.
If during one of the operations described above you have entered an incorrect value in the PIN
code field three times (the number of remaining attempts is displayed in the Attempts left field),
the identification card inserted into your CDMA or GSM USB modem is blocked. For further use of
the card, enter the PUK code in the relevant field, and then specify a new PIN code for your SIM or
R-UIM card in the New PIN code and New PIN code confirmation fields. Click the Apply
button.
Page 84 of 100