User manual

DIR-620 Multifunction Wireless Router Supporting GSM, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Configuring via Web-based Interface
PIN
On the USB modem > PIN page, you can change the PIN code of the identification card inserted
to your CDMA or GSM modem, disable or enable the check of the PIN code.
Figure 64. The USB modem > PIN page. The PIN code check is enabled.
If the PIN code check is enabled (the Disable PIN check checkbox is deselected), the following
field are displayed on the page:
Parameter Description
PIN code Enter the current PIN code of the identification card in this field.
New PIN code
Enter a new PIN code in this field.
New PIN code
confirmation
Enter the new PIN code again to avoid mistypes.
When you have specified the new PIN code, click the Apply button.
To disable the PIN code check, select the Disable PIN check checkbox, enter the current PIN
code in the PIN code field and click the Apply button.
Page 83 of 100