User manual

DIR-620 Multifunction Wireless Router Supporting GSM, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Configuring via Web-based Interface
You can specify the following parameters:
Parameter Description
Rules name A name for the rule for easier identification.
Outgoing
A port of the computer from your LAN, from which data are transferred to the
external network (outgoing traffic). From the Protocol drop-down list located
in this line, you can select a protocol to which this rule will be applied upon
transferring data from the specified port.
Incoming
A port of the router, which will be open to receive data from the external
network (incoming traffic). From the Protocol drop-down list located in this
line, you can select a protocol to which this rule will be applied upon receiving
data to the specified port.
Click the Change button.
To edit an existing rule for the Port Triggering function, click the relevant rule link. On the opened
page, change the needed parameters and click the Change button.
To remove an existing rule for the Port Triggering function, click the relevant rule link. On the
opened page, click the Delete button.
Page 79 of 100