User manual

DIR-620 Multifunction Wireless Router Supporting GSM, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Configuring via Web-based Interface
Figure 57. The page for adding a virtual server.
You can specify the following parameters:
Parameter Description
Template
Select a virtual server template from the drop-down list, or select <Custom> to
specify all parameters of the new virtual server manually.
Name
A name for the virtual server for easier identification. You can specify any
name.
Protocol
A protocol that will be used by the new virtual server. Select a value from the
drop-down list.
Public port
A port of the router from which traffic is directed to the IP address specified in
the Private IP field.
Private port
A port of the IP address specified in the Private IP field to which traffic is
directed from the Private port.
Private IP
The IP address of the server from the local area network.
Click the Change button.
To edit the parameters of an existing server, follow the link with the name of the server. On the
opened page, change the needed parameters and click the Change button.
To remove an existing server, follow the link with the name of the server. On the opened page, click
the Delete button.
Page 75 of 100