User manual

DIR-620 Multifunction Wireless Router Supporting GSM, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Configuring via Web-based Interface
Client
On the Client tab, you can configure the router as a client to connect to a wireless access point.
As a rule, a client mode is used to connect to a WISP network. All parameters specified on this tab
should be provided by your WISP.
Figure 48. The tab for configuring the client mode.
The following fields are available on the tab:
Parameter Description
Client
Select the checkbox to configure the router as a client.
SSID The name of the network to which the router connects.
BSSID
The unique identifier of the network to which the router connects.
Network
Authentication
The authentication type of the network to which the router connects.
Page 64 of 100