User manual

DIR-620 Multifunction Wireless Router Supporting GSM, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Configuring via Web-based Interface
The following fields are available on the tab:
Parameter Description
WDS Mode
The WDS function mode.
Disable: The function is disabled.
Bridge mode: Access points communicate to each other only,
wireless devices cannot connect to them.
Repeater mode: Access points communicate to each other,
wireless clients can connect to the WLAN created by
interconnected access points.
WDS Phy Mode
A physical mode of data transfer between access points
interconnected via the WDS function.
CCK: 802.11b devices only.
OFDM: 802.11g devices only.
HTMIX: 802.11g and 802.11n devices.
GREENFIELD: 802.11n devices only.
WDS Encryption
A type of encryption for data transfer between access points
interconnected via the WDS function.
NONE: No encryption.
WEP.
TKIP.
AES.
Encryption Key
A key for the specified type of encryption. If the NONE value is
selected from the WDS Encryption drop-down list, the field is
not displayed.
WDS MAC(1-4)
The MAC addresses of devices connected to the router via the
WDS function.
!
The WDS function parameters specified on the tab must be the same for all interconnected
devices. In addition, it is required to set the same channel (on the Basic settings tab).
When you have configured the parameters, click the Change button.
Page 59 of 100