User manual

DIR-620 Multifunction Wireless Router Supporting GSM, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Configuring via Web-based Interface
By default, the Open network authentication type with no encryption is specified for the WLAN
(or every part of the WLAN).
!
The default security settings do not provide sufficient protection for the WLAN. Please,
specify your own security settings for the WLAN (or each part of the WLAN if the
network was splitted into parts).
Figure 37. Network authentication types supported by the router.
The router supports the following authentication types:
Authentication type Description
Open
Open authentication (with or without WEP encryption).
Open-IEEE8021X
Open authentication using a RADIUS server (with or
without WEP encryption).
Shared
Shared key authentication with WEP encryption.
WEPAUTO
A mixed type of authentication. When this value is
selected, devices using the Open authentication type with
enabled WEP encryption and devices using the Shared
authentication type can connect to the router's WLAN.
WPA
WPA-based authentication using a RADIUS server.
WPA-PSK WPA-based authentication using a PSK.
WPA2
WPA2-based authentication using a RADIUS server.
WPA2-PSK WPA2-based authentication using a PSK.
WPA/WPA2 mixed
A mixed type of authentication. When this value is
selected, devices using the WPA authentication type and
devices using the WPA2 authentication type can connect to
the router's WLAN.
WPA-PSK/WPA2-PSK mixed
A mixed type of authentication. When this value is
selected, devices using the WPA-PSK authentication type
and devices using the WPA2-PSK authentication type can
connect to the router's WLAN.
Page 48 of 100