User manual

DIR-620 Multifunction Wireless Router Supporting GSM, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Configuring via Web-based Interface
Parameter Description
Hide Access Point
If the checkbox is selected, other users cannot see your Wi-Fi network. (It
is recommended not to select this checkbox in order to simplify initial
configuration of your WLAN.)
SSID
A name for the WLAN. By default, the value DIR-620 is specified. If
your network is spitted into parts, each part has the default name (DIR-
620.2, DIR-620.3, and DIR-620.4). It is recommended to specify
another name for the network upon initial configuration (use digits and
Latin characters).
Country
The country you are in. Select a value from the drop-down list.
Channel
The wireless channel number. By default, channel 6 is specified. If you
want to use another channel, select a value from the drop-down list. When
the auto value is selected, the router itself chooses the channel with the
least interference.
Wireless mode
Operating mode of the router's wireless network. This parameter defines
standards of the devices that will be able to use your wireless network.
Select a value from the drop-down list.
Max Associated
Clients
The maximum number of devices connected to the wireless network of the
router. When the value 0 is specified, the router does not limit the number
of connected clients.
When you have configured the parameters, click the Change button.
Security Settings
On the Security settings tab, you can modify security settings of the WLAN.
Figure 36. The default security settings.
Page 47 of 100