User manual

DIR-620 Multifunction Wireless Router Supporting GSM, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Configuring via Web-based Interface
You can specify or change the following parameters:
Parameter Description
Interface type The type of configuration for this interface (PPPoE).
Connection
A name for this connection for easier identification (you can specify any
name).
Interface
A physical interface to which the configured PPPoE interface will be
assigned.
Username The login to register on the PPPoE server.
Password
The password to register on the PPPoE server. By default, a value entered
in this field is hidden with asterisks (*). To display it, select the Show
password checkbox.
Access
concentrator name
The name of the provider's PPPoE server.
Service name
The name of the service on the provider’s PPPoE server.
Default route
Select this checkbox if you want to use the IP address of the server as the
default route (the destination address for all packets, which routes have
not been found).
Metric
This parameter is used to assign a priority for this interface. The lower the
value, the higher is the priority.
Start
Select a radio button to enable or disable the interface auto-start upon the
boot-up of the router.
Click the Change button.
Page 35 of 100