User manual

DIR-620 Multifunction Wireless Router Supporting GSM, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Configuring via Web-based Interface
Adding or Editing PPTP or L2TP Interface
Figure 23. The page for adding a PPTP interface.
You can specify or change the following parameters:
Parameter Description
Interface type The type of configuration for this interface (PPTP or L2TP).
Connection
A name for this connection for easier identification (you can specify any
name).
Username
The login to register on the PPTP or L2TP server correspondingly.
Password
The password to register on the PPTP or L2TP server correspondingly. By
default, a value entered in this field is hidden with asterisks (*). To display it,
select the Show password checkbox.
Server address The IP address of the PPTP or L2TP server correspondingly.
Default route
Select this checkbox if you want to use the IP address of the server as the
default route (the destination address for all packets, which routes have not
been found).
Metric
This parameter is used to assign a priority for this interface. The lower the
value, the higher is the priority.
Page 33 of 100