User manual

DIR-620 Multifunction Wireless Router Supporting GSM, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Configuring via Web-based Interface
Net
In this menu you can specify basic network settings for the router: modify parameters of the
physical interfaces, add p-t-p interfaces, and define static routes and rules for remote access to the
web-based interface. In addition, you can add DNS servers, add domains to the search list, edit
parameters of the DHCP server, change settings of your wireless network and the reservation
function, configure a DDNS service, and enable IGMP and the UPnP function.
Network Interfaces
On the Net > Network interfaces page, you can edit settings of the router's physical interfaces.
Figure 18. The Net > Network interfaces page.
The LAN interface represents the ports of the built-in switch (ports 1-4) coupled with the wireless
interface (the predefined name is br0).
The WAN interface represents the Internet port of the router (the predefined name is vlan2).
The WIMAX interface represents the router's USB port and a WiMAX USB modem connected to it
(the predefined name is wimax0).
You can enable, disable, start, or stop either interface. To perform the needed action, click the
relevant button in the Actions column.
Page 27 of 100