Installation guide

DIR-620 Quick Installation Guide

• For a CDMA USB modem:

EVDO+1X

The modem connects to the EVDO network. If unavailable, connects to

the 1X network.

EVDO only

The modem connects to the EVDO network only.

1X only

The modem connects to the 1X network only.

• For a GSM USB modem:

3G 2G

The modem connects to the 3G network. If unavailable, connects to the 2G

network.

2G 3G

The modem connects to the 2G network. If unavailable, connects to the 3G

network.

The modem connects to the 3G network only.

The modem connects to the 2G network only.

3. Proceed to the Internet Setup > Connection Settings page to

specify parameters for the Internet connection.

4. Select the USB Adapter value from the Internet connection

interface drop-down list.

5. From the Operator drop-down list, select an operator which network

will be used to connect to the Internet (an identification card of the

relevant operator is required). Make sure that values of the User name,

Password, Dial number and APN fields correspond to the data given

to you by the operator.

You can create your own profile containing all needed setting. To do so, select the

<custom> value from the drop-down list. After configuring the profile settings

and clicking the Change button, the new profile with the name from the

Operator name field appears in the list.

6. From the Reconnect mode drop-down list, select the Always On

value.

7. Click the Change button.