Quick Installation Guide DIR-620 Multifunction Wireless Router Supporting GSM, CDMA, WiMAX with Built-in 4-port Switch
DIR-620 Quick Installation Guide BEFORE YOU BEGIN Delivery Package • Multifunction wireless router DIR-620 • Power adapter DC 5V/2.5A • Ethernet cable (CAT 5E) • CD-ROM with “User Manual” and “Quick Installation Guide” • “Quick Installation Guide” (brochure) If any of the items are missing, please contact your reseller. ! Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.
DIR-620 Quick Installation Guide System Requirements and Equipment • A computer with any operating system that supports a web browser. • A web browser to access the web-based interface of the router: Windows Internet Explorer, Mozilla Firefox, Google Chrome, or Opera. • A NIC (Ethernet or Wi-Fi adapter) to connect to the router. • An 802.11b, g, or n Wi-Fi adapter to create a wireless network. • A WiMAX USB modem1 to connect to the Internet via a WiMAX network2.
DIR-620 Quick Installation Guide CONNECTING TO PC (OS WINDOWS XP) PC with Ethernet Adapter 1. Power off your PC. 2. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC. 3. To connect via a WiMAX, CDMA or GSM network: connect your USB modem to the USB port3 on the front panel of the router. 4. Connect the power cord to the port 5V-2.
DIR-620 Quick Installation Guide 3. In the Local Area Connection Properties window, on the General tab, in the This connection uses the following items section, select the Internet Protocol (TCI/IP) line. Click the Properties button.
DIR-620 Quick Installation Guide 4. Select the Obtain an IP address automatically radio button. Click the OK button. Click the ОК button. Now your computer is configured to obtain an IP address automatically. PC with Wi-Fi Adapter 1. To connect via a WiMAX, CDMA or GSM network: connect your USB modem to the USB port4 on the front panel of the router. 2. Connect the power cord to the port 5V-2.5A on the back panel of the router, then plug the power adapter into an electrical outlet or power strip. 3.
DIR-620 Quick Installation Guide Now you should configure your Wi-Fi adapter. 1. Click the Start button and proceed to the Control Panel > Network and Internet Connections > Network Connections window. 2. Select the icon of the wireless connection and make sure that your Wi-Fi adapter is on. 3. Search for available wireless networks. 4. In the opened Wireless Network Connection window, select the needed wireless network (DIR-620) and click the Connect button.
DIR-620 Quick Installation Guide CONFIGURING ROUTER Connecting to Web-based Interface 1. Start a web browser. 2. In the address bar of the web browser, enter the IP address of the router (by default, the following IP address is specified: 192.168.0.1). Press the Enter key. 3. On the opened page, enter the username (login) and password for the administrator account (by default, the following username and password are specified: admin, admin). Then click the Enter button.
DIR-620 Quick Installation Guide The web-based interface of the router is bilingual (English/Russian). Select a needed language from the menu displayed when the mouse pointer is over the Language caption. You can change the language of the web-based interface in any menu item. If the PIN code check is enabled for the identification card of your CDMA or GSM USB modem, the page for checking the PIN code is displayed after logging in to the web-based interface of the router.
DIR-620 Quick Installation Guide Connection via WiMAX network If you want the router to connect to the Internet via a WiMAX USB modem automatically after turning on, follow the steps below: 1. Proceed to the Net > Network interfaces page. 2. Follow the WIMAX link. 3. Select an interface type according to data of your WiMAX operator (Static, DHCP, or PPPoE). If you have selected the Static type, specify the needed settings. 4.
DIR-620 • Quick Installation Guide For a CDMA USB modem: EVDO+1X The modem connects to the EVDO network. If unavailable, connects to the 1X network. EVDO only The modem connects to the EVDO network only. 1X only The modem connects to the 1X network only. • For a GSM USB modem: 3G 2G The modem connects to the 3G network. If unavailable, connects to the 2G network. 2G 3G The modem connects to the 2G network. If unavailable, connects to the 3G network.
DIR-620 Quick Installation Guide Wired Connection ! If your ISP uses MAC address binding, assign the MAC address registered by your ISP upon concluding the agreement to the WAN interface. To assign the MAC address of the network interface card (of the computer that is being used to configure the router), click the Client MACaddress button. Configuring Static IP or Dynamic IP (DHCP) Connection 1. Proceed to the Net > Network interfaces page. 2. Follow the WAN link. 3.
DIR-620 Quick Installation Guide 7. Click the Add link. 8. Select a value from the Interface type drop-down list. To create a PPTP or L2TP connection, select the PPTP or L2TP value correspondingly from the Interface type drop-down list, and populate the fields in accordance with data provided by your ISP. Then select a method for starting this interface and click the Change button. Configuring PPPoE Connection 1. Proceed to the Net > Network interfaces page. 2. Follow the WAN link. 3.
DIR-620 Quick Installation Guide Wireless Network By default, the wireless network of the router is open (it requires no password to access it). To avoid unauthorized access to your wireless local area network, change the default settings of the router. Example of Wireless Settings 1. Proceed to the Net > Wireless page. 2. Proceed to the Security settings tab. 3. Select the WPA-PSK value from the Network Authentication dropdown list. 4.
DIR-620 Quick Installation Guide Administrator Password It is highly recommended to change the administrator password used to access the web-based interface of the router upon initial configuration. This helps you to improve your network security. 1. Go to the System > Administrator password page. 2. Enter a new password for the administrator account in the Password and Password confirmation fields. Use digits and Latin characters. 3. Click the Change button.
DIR-620 Quick Installation Guide TECHNICAL SUPPORT You can find software updates and user documentation on our website. D-Link provides its customers with free support within the product's warranty period. Customers can contact the technical support group by phone or by email/Internet. FOR TELEPHONE NUMBERS AND ADDRESSES OF D-LINK OFFICES WORLDWIDE VISIT http://www.dlink.
