Systems Network Router User Manual
CLI Examples 111
17 Class of Service Queuing
Figure 61. CoS Mapping and Queue Configuration
Continuing this example, you configured the egress Port 0/8 for strict priority on queue 6, and
a set a weighted scheduling scheme for queues 5-0. Assuming queue 5 has a higher weighting
than queue 1 (relative weight values shown as a percentage, with 0% indicating the bandwidth
is not guaranteed), the queue service order is 6 followed by 5 followed by 1. Assuming each
queue unloads all packets shown in the diagram, the packet transmission order as seen on the
network leading out of Port 0/8 is B, A, D, C. Thus, packet B, with its higher user precedence
than the others, is able to work its way through the device with minimal delay and is
transmitted ahead of the other packets at the egress port.
5SER0RI
PACKET!
5SER0RI
PACKET"
UNTAGGED
PACKET#
5SER0RI
PACKET$
TIME
0ORT
MODEgTRUSTDOTPg
P #/31-AP
PORTDEFAULT
PRIORITY TRAFFICCLASS
0ORT
!$
1
1
STRICT
WEIGHTED
1 WEIGHTED
1 WEIGHTED
1 WEIGHTED
#
1
1
WEIGHTED
WEIGHTED
&ORWARDVIA
SWITCHFABRICTO
EGRESS0ORT
%GRESS
0ACKET4RANSMISSIONORDER " ! $ #
"
1
WEIGHTED