System information

• Destination IP Mask: 0.0.0.255
• Destination L4 Port: http
6. Create a new rule, enter 2 as the Rule ID, Permit as the Action, and True for Match Every,
then click Submit. The reason for this second rule is that an ACL has an implicit “deny all”
rule at the end. ACL rules are checked in order and the action of the first to match the flow is
taken. If no match occurs, the packet will be dropped.
Rule 1
Next, you must attach the ACL to port 0/1 and port 0/13 (the physical ports to which the APs will
be connected) so that the rules are applied to the appropriate wireless client traffic that goes
through the APs connected to the switch.
1. From the ACL Æ Interface Configuration page,
2. Select port 0/1 from the Slot/Port drop-down menu.
3. Select IP ACL as the ACL Type.
4. Enter 1 as the sequence number, and click Submit.
5. Repeat the steps to associate ACL 100 with port 0/13.