System information

representation of your wireless network. From each object on the WLAN Visualization graph,
you can access information about the object and links to configuration pages on the Web interface.
WLAN Visualization can help administrators do the following:
Track how managed APs are deployed graphically
Monitor the wireless network status via the dynamic updated diagram.
Access visual information, such as how APs are placed, how many clients are associated
to a certain AP, and where rogue APs are located graphically.
Before launching WLAN visualization tool, you need to upload a floor plan image file to Unified
Switch first. It can be done by selecting the WLAN tab from the navigation panel and traversing
down to Administration Æ WLAN Visualization Æ Download Image.
Note:
1. There’s a sample floor plan image file in CD for your test, and it’s ‘test-floorplan.jpg’.
2. When you try to upload your own floor plan image file to Unified Switch, it’s recommended
the file size is smaller than 150KB.
3. The RF power displayed in this tool is only for reference, and it is not intended to reflect
the real RF status ‘cause that requires the input of materials of office blocks and walls
or ceilings and complex computing and simulation accordingly.
The Network visualization can be launched by selecting the WLAN tab from the navigation panel
and traversing down to Administration -> WLAN Visualization -> WLAN. When you first
launch this tool, you’ll see a blank one as below.