System information
2. To create a routing interface for VLAN 5, enter 5 into the VLAN ID field and select
Create.
This creates a logical routing interface with the slot/port designation of 4/5 for VLAN 5.
3. To create a routing interface for VLAN 250, enter 250 into the VLAN ID field and
select Create.
This creates a logical routing interface with the slot/port designation of 4/6 for VLAN
250.
4. Navigate to L3 Features Æ IP Æ Interface Configuration.
5. Select interface 4/5 from the Slot/Port drop-down menu and enter the following
information:
a. IP Address: 172.17.5.253
b. Subnet Mask: 255.255.255.0
c. Routing Mode: Enable
6. Click Submit.
7. Select interface 4/6 from the Slot/Port drop-down menu and enter the following
information:
d. IP Address: 192.168.250.254
e. Subnet Mask: 255.255.255.0
f. Routing Mode: Enable
8. Click Submit.
9. Verify the VLAN Routing information on the Monitoring Æ L3 Status Æ VLAN
Routing Summary page.
3.1.3. Configure Routing
You must configure routes on the Unified Switch for integration with the simulated customer
network. You can either configure static routes for each network you need access to at the
Unified Switch or you can configure a default route. The Unified Switch at a minimum requires
IP access to the “remote” AP that is connected via the L3 router to allow the Unified Access
System to manage that remote AP. Other routes (or a default route) provide access for clients to
reach other networks.
The following default route can be added on the Unified Switch.
Customer Network Address Mask Next Hop IP Address
0.0.0.0 0.0.0.0 172.17.5.254
Note: Interface 172.17.5.254 is a counterpart router interface on the L3 device attached to port
0/24 on the Unified Switch. Port 0/24 is associated with the VLAN routing interface 5, which has
an IP address of 172.17.5.253.
Use the following procedures to create the default route.
1. From the LAN tab, navigate to L3 Features Æ Router Æ Configured Routes.
2. Select Default from the Route Types drop-down menu.
3. In the Next Hop IP Address field, enter 172.17.5.254, which is the IP address of
the interface on the “customer” L3 device that is connected to port 0/24.