System information

4. Click the SSID tab to configure the VAP and Network settings for the APs.
5. Select the 802.11b/g radio.
6. Select the check box next to Managed SSID 2 and click Edit.
7. Change the following Network parameters and select Submit:
a. SSID – D-LINK-NET1
b. VLAN – 100
c. Security – WEP
• Authentication – Open System
• WEP Key Type – ASCII
• WEP Key Length – 64
• WEP Key 1 – 98765
Note: For convenience, the SSID created under one radio is propagated to the second radio. The
SSID parameters on the second radio may then be modified.
8. To repeat the procedure and add a second secure network, return to the SSID page by
clicking on the SSID tab.
9. Select the check box next to Managed SSID 3 and click Edit.
10. Change the following parameters and select Submit:
a. SSID – D-LINK-NET2
b. VLAN – 200
c. Security – WEP
• Authentication – Open System
• WEP Key Type – ASCII
• WEP Key Length – 64
• WEP Key 1 – 98765