System information

1.1.7. ACL Configuration
The ACL in this scenario blocks IP traffic between wireless clients who access the network
through D-LINK-NET1 and D-LINK-NET2.
1. From the LAN menu, navigate to the Access Control Lists > IP ACL > Access Profile
Settings page.
2. From the IP ACL field, select Create New Extended ACL from the drop-down menu.
3. Enter 100 in the ACL ID field, then click Submit.
4. From the Rule Configuration page, enter 1 as the Rule ID, Deny as the Action, and click
Submit.
5. The screen refreshes with additional fields. Click the Configure button associated with the
appropriate fields and enter the following criteria to deny IP traffic from clients on the D-
LINK-NET1 network to clients on the D-LINK-NET2 network:
• Protocol Keyword: IP
• Source IP Address: 192.168.100.0
• Source IP Mask: 0.0.0.255 (This is a wildcard mask)
• Destination IP Address: 192.168.200.0
• Destination IP Mask: 0.0.0.255 (This is a wildcard mask)