System information

 AP Discovery
Unified System Usage
AP Discovery – L3 Discovery
 It is possible to ask the AP to discover the switch.
 The users need to use CLI to achieve this.
 Login to the CLI of the AP and configure 1-4 Switch IP addresses using
command
“
set managed
-
ap switch
-
address
-
1
”
command set managed
-
ap switch
-
address
-
1
 Next, the AP will try to discover the switches in sequence with the IP
address
 The switch and AP must be able to ping each other.
UDP Discovery Messa
g
e
List of Switch IPs
Switch 1 IP
Switch 2 IP
48