System information

Command Line Interface
CLI and Scenario
 There are three basic levels of Command Mode for users to classify user
privilege. Different modes can run different level of commands.
 User EXEC mode is the first level that contains a limited set of commands to
view basic system information, enter enable to get into Privileged EXEC
d
mo
d
e.
 The Privileged EXEC mode allows you to enter any EXEC command or enter
the Global Configuration mode with the command configure
 Global Config mode groups general setup commands and permits making
difi ti t th i fi ti
mo
difi
ca
ti
ons
t
o
th
e runn
i
ng con
fi
gura
ti
on.
Command
Mode
Prompt Access Method
Exit or Access
Previous Mode
User EXEC
(
DWS-4026
)
>
T
his is the first level of
T
o exit
,
enter lo
g
out
(
)
access.
,
g
Privileged EXEC (DWS-4026)# From the User EXEC
mode, enter enable
To exit to User EXEC
mode, enter exit or press
Ctrl-z
Global Config (DWS-4026)
(Config)#
From the Privileged EXEC
mode , enter configure
To exit to Privileged EXEC
mode, enter exit or press
Ctrl-z
170