System information

76 © 2001- 2011 D-Link Corporation. All Rights Reserved.
Configuration Guide
Using the Web Interface to Configure VLAN Routing
You can perform the same configuration by using the Web Interface.
Use the LAN> L2 Features > VLAN> VLAN Configuration page to create the VLANs,
specify port participation, and configure whether frames will be transmitted tagged or
untagged.
Figure 32. VLAN Configuration
Use the LAN> L2 Features > VLAN > Port Configuration page to specify the handling of
untagged frames on receipt.
Figure 33. VLAN Port Configuration