System information

Using the Web Interface to Configure LLDP 63
8 Link Layer Discovery Protocol
Using the Web Interface to Configure LLDP
The LLDP menu page contains links to the following features:
• LLDP Configuration
• LLDP Statistics
• LLDP Connections
• LLDP Configuration
Use the LLDP Global Configuration page to specify LLDP parameters.
Figure 23. LLDP Global Configuration
The LLDP Global Configuration page contains the following fields:
• Transmit Interval (1-32768) — Specifies the interval at which frames are transmitted.
The default is 30 seconds.
• Hold Multiplier (2-10) — Specifies multiplier on the transmit interval to assign to TTL.
Default is 4.
• Re-Initialization Delay (1-10) — Specifies delay before a re-initialization. Default is 2 sec-
onds.
• Notification Interval (5-3600) — Limits the transmission of notifications. The default is
5 seconds.