System information

180 © 2001- 2011 D-Link Corporation. All Rights Reserved.
Configuration Guide
Example #3: show sntp server
(DWS-3024) #show sntp server
Server IP Address: 81.169.155.234
Server Type: ipv4
Server Stratum: 3
Server Reference Id: NTP Srv: 212.186.110.32
Server Mode: Server
Server Maximum Entries: 3
Server Current Entries: 1
SNTP Servers
------------
IP Address: 81.169.155.234
Address Type: IPV4
Priority: 1
Version: 4
Port: 123
Last Update Time: MAY 18 04:59:13 2005
Last Attempt Time: MAY 18 11:59:33 2005
Last Update Status: Other
Total Unicast Requests: 1111
Failed Unicast Requests: 361
Example #4: configure sntp
(DWS-3024)(Config) #sntp ?
broadcast Configure SNTP client broadcast parameters.
client Configure the SNTP client parameters.
server Configure SNTP server parameters.
unicast Configure SNTP client unicast parameters.
Example #5: configure sntp client mode
(DWS-3024) (Config) #sntp client mode broadcast ?
<cr> Press Enter to execute the command.
(DWS-3024) (Config) #sntp client mode unicast ?
<cr> Press Enter to execute the command.
(DWS-3024)(Config)#sntp broadcast client poll-interval ?
<6-10> Enter value in the range (6 to 10). Poll
interval is 2^(value) in seconds.