User's Manual

Section 4 – Troubleshooting
D-Link DSL-2740E User Manual
49
ADSL Test
Choose MAINTAINANCE > Diagnosis > ADSL Test. The page shown in the
right figure appears. In this page, you can test your DSL connection by clicking
Start.
.
DIAGNOSTIC Test
Choose MAINTAINANCE > Diagnosis > Diag Test. The page shown in the right
figure appears. In this page, you can test the bit error rate.
The DSL Router is capable of testing your DSL connection. The individual tests
are listed below. If a test displays a fail status, click "Run Diagnostic Test" button
again to make sure the fail status is consistent.